Memphetic Posted April 22, 2007 Report Share Posted April 22, 2007 Is this going to be strong enough?? I cut my headstock angle like so: Quote Link to comment Share on other sites More sharing options...
Mattia Posted April 22, 2007 Report Share Posted April 22, 2007 Yes. It's how I do pretty much all my necks. Quote Link to comment Share on other sites More sharing options...
prs man Posted April 22, 2007 Report Share Posted April 22, 2007 I do it this way also. you will most likely be gluing on a piece of head stock over lay witch will add more support. Quote Link to comment Share on other sites More sharing options...
Daniel Sorbera Posted April 22, 2007 Report Share Posted April 22, 2007 I've done it both ways and each one had plenty of strength. You should be good to go. Quote Link to comment Share on other sites More sharing options...
Memphetic Posted April 23, 2007 Author Report Share Posted April 23, 2007 Good idea with the overlay, prs man. That would keep it from cracking as easily, I would suppose, and provide a nice even surface Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.