isaac Posted July 21, 2007 Report Share Posted July 21, 2007 Hey. I am building my first guitar. I am keeping the electronics very simple, as I have very little experience with creating circuits. I plan on having one humbucker connected to a volume knob and then an output. Can someone explain to me how I would do this? Thanks, Isaac. Quote Link to comment Share on other sites More sharing options...
Southpa Posted July 21, 2007 Report Share Posted July 21, 2007 http://www.seymourduncan.com/support/schem.../1hum_1vol.html Quote Link to comment Share on other sites More sharing options...
isaac Posted July 21, 2007 Author Report Share Posted July 21, 2007 Thanks for that! Quote Link to comment Share on other sites More sharing options...
Southpa Posted July 21, 2007 Report Share Posted July 21, 2007 Just to add, be aware that the diagram is for a Seymour Duncan HB. Wire colors (and number) vary with pickup brands. Quote Link to comment Share on other sites More sharing options...
cr_XD Posted July 21, 2007 Report Share Posted July 21, 2007 if you had no volume pot or tone pot, what would the set-up look like?? it just came to my mind, and i haven't found any schematic. thanx Quote Link to comment Share on other sites More sharing options...
Mike Sulzer Posted July 21, 2007 Report Share Posted July 21, 2007 Everything that goes to the case of the pot would move to the sleeve of the jack. The wire from the pot to the tip of the jack would be removed, and the black wire from the pickup would be moved to the tip of jack. If I said all that right, then there is nothing left on the pot and you can toss it out. if you had no volume pot or tone pot, what would the set-up look like?? it just came to my mind, and i haven't found any schematic. thanx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.