Joobsauce Posted July 29, 2007 Report Share Posted July 29, 2007 ok, I have my guitar (a cheap firstact) and I'm wiring it up. What I want is no tone control, and no selector switch, to switch between pickups, I just want 2 volume pots to control each pickup separately. I have each pickup wired up so if I put it to the output jack, it will play on that pickup, but if I hoock up the other pickup-volume pot with it, everytime I turn down or off one of the pickups, it cuts the signal to the other one, and I get no signal to the amp. Very stumped on how to proceed right now. I have it basically wired like this- Thank god for MS paint any help appreciated guys!! Quote Link to comment Share on other sites More sharing options...
rubber314chicken Posted July 29, 2007 Report Share Posted July 29, 2007 switch the left 2 lugs on the put (input and output) Quote Link to comment Share on other sites More sharing options...
Joobsauce Posted July 29, 2007 Author Report Share Posted July 29, 2007 that worked! Thanks a lot man! Never would have thought of that either. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.