berggeetars Posted July 29, 2007 Report Share Posted July 29, 2007 Preparing to wire up the new Tele I just built. Specs are 2 emg select humbuckers, 1 volume, 2 mini switches (1 per humbucker) to split the humbuckers into single coils, and one kill switch. Below is the diagram that I have drawn up. I'm not the greatest at wiring, and I'm even worse at making understandable schematics, so if you have trouble reading it let me know. Just wondering if this setup will work. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
rubber314chicken Posted July 29, 2007 Report Share Posted July 29, 2007 that will work, but it will not be hum canceling with both humbuckers in single mode, you might want to cut the south coil on one of them, and the kill switch will make a little noise when in use, but it will work. if you want a noiseless kill switch, get a normally open momentary, and connect it to the 2 lugs of the input jack. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.