jaycee Posted August 2, 2007 Report Share Posted August 2, 2007 I am going to use a mortise and tenon joint with a bolt and barrel to join it all together. My plans don't have this type of joint on them so I am wondering what size to make the tenon, 25mm ( 1" ) deep or maybe 20mm (3/4 ") What has worked best for you guys? Quote Link to comment Share on other sites More sharing options...
Myka Guitars Posted August 2, 2007 Report Share Posted August 2, 2007 I haven't used this type of joint so I can't answer but Cumpiano literally wrote the book on it: Cumpiano Neck Joint ~David Quote Link to comment Share on other sites More sharing options...
jaycee Posted August 2, 2007 Author Report Share Posted August 2, 2007 (edited) I have seen that page thanks, but there is no dimension for the depth of the tenon, not unless I'm missing it, although if that drawing is to scale it looks about 20mm Edited August 2, 2007 by jaycee Quote Link to comment Share on other sites More sharing options...
GoodWood Posted August 3, 2007 Report Share Posted August 3, 2007 I have seen that page thanks, but there is no dimension for the depth of the tenon, not unless I'm missing it, although if that drawing is to scale it looks about 20mm Cumpiano has a new page on this subject, google tenon joint cumpiano guitar........I use about 1 " and I went a bit wider but its probably not necesarry. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.