jaycee Posted November 13, 2007 Report Share Posted November 13, 2007 I have uncovered a spreadsheet that I stumbled upon ages ago when doing some research. As I remember it came from an instruments makers college or something simillar in the UK. I'm not familliar with the workings of spreadsheets ( never having the need to use them) and this looks pretty useful. here's a section of it Neck Join to Top of Sound Hole 3.85 3 27.3 97.8 Neck Join to Center of Sound Hole 5.73 5 23.3 145.5 Nut 100th Inch 32nd MM Width of Nut 0.16 0 5.0 4.0 4 Neck Edge to Base String of Nut 0.13 0 4.0 3.2 5 Neck Edge to Treble String of Nut 0.13 0 4.0 3.2 6 Neck & Fingerboard 100th Inch 32nd MM Distance to Body + Nut 14.57 14 18.4 370.2 Width of Neck at Nut 1.88 1 28.2 47.8 7 Width of Neck at Body 2.13 2 4.0 54.0 8 Angle of Neck Taper 0.49 15.6 Width of Fingerboard at Sound Hole 2.19 2 6.1 55.6 Maximum Width of Fingerboard 2.20 2 6.3 55.8 Maximum Length of Fingerboard 18.63 18 20.0 473.1 Bridge 100th Inch 32nd MM Compensation 0.16 0 5.0 4.0 9 Scale + Compensation 25.56 25 17.8 649.1 Distance from Neck Join to Saddle 11.14 11 4.4 282.9 Space Between 1st & Last String at Bridge 2.13 2 4.0 54.0 10 Fixed Space Between Each String 0.43 0 13.6 10.8 Computed Spacing at Bridge 2.04 2 1.3 51.8 Computed Space Between Strings 0.41 0 13.1 10.4 Length of Saddle 3.13 3 4.0 79.4 11 Length of Bridge 6.00 6 0.0 152.4 12 Width of Bridge 1.25 1 8.0 31.8 13 Depth of Bridge 0.38 0 12.0 9.5 14 Backset of Neck 100th Inch 32nd MM Height of Fingerboard (with frets) 0.3125 0 10.0 7.9 everything is a bit wokey because it hasn't cut and pasted well , but as I say it is a spreadsheet and you can put different values in the cells and re calculate If any one knows more about it or would like a copy let me know. It was freely offered from the website and emailed to me, so I'm guessing I can do the same Quote Link to comment Share on other sites More sharing options...
fryovanni Posted November 13, 2007 Report Share Posted November 13, 2007 Looks like it is just a unit converter . Measure in inches to the hundredth in decimal form, Same measure in whole inches plus 32nds to the tenth of a 32nd, and same measure in Millimeters. I suppose that is handy if you are using a dial caliper or digital caliper, a rule with 32nds indicated, and a metric rule. Quote Link to comment Share on other sites More sharing options...
jaycee Posted November 14, 2007 Author Report Share Posted November 14, 2007 Thanks Rich Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.