Need A Diagram

[Mastermind]

Hi. I'm looking for a wiring diagram for a guitar with 2 volume, no tone and a 3 way switch. The pickups are a DiMarzio X2N and a Super2

Thanks

[Gingah]

Do you want a technical diagram or a theoretical one? For a technical one:

This one shows the connection with one pickup and a volume for it, so you could just do the connection twice and have the wires end in the same output jack.

Another alternative could be this one, which shows a connection with two pickups - just leave out the tone pots and have it go straight from the capacitor.

Both of the links above are to humbucker pickup diagrams, which is suitable as both the DiMarzio X2N and the Super2 are humbuckers style pickups.

Edited January 16, 2008 by Gingah

[Mastermind]

Is there another way to ground other than to connect the wires with the bridge? Because I already installed the bridge but I didn't do any holes for the wires.

[Gingah]

I think you just take all the ground wires and run them along for the ground on the output jack, shouldnt be a crisis if the bridge/tremolo is or not.