Jump to content

No Sound From Bridge Pup.


Recommended Posts

I have a Epi Les paul. The bridge pickup just stopped working.. (actually it does have a slight output) I inspecteted all of the solder joints and all look good. Any suggestions as to where to start?

Thanks, Bluetic :D

Link to post
Share on other sites

As usual...

1) unsolder pickup leads and connect them directly to a jack. If the sound is normal, the problem is in the pots etc.

2) measure DC resistance between pickup leads. If there are only two leads, you should see about 8k or 9k or anything close. 0 ohms or infinite resistance is a problem.

3) check all parts in the control cavity. If any one of them is failing, you might have low or no output.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...