costo Posted March 26, 2008 Report Share Posted March 26, 2008 Hey everyone i was wondering if any one had plans for a neck removal jig, the one at stew mac is a little more than i want to spend. any help would be great. Thanks Quote Link to comment Share on other sites More sharing options...
erikbojerik Posted March 27, 2008 Report Share Posted March 27, 2008 I just went and built one from plywood and hex bolts, just by going off photos. Took about an hour (not counting the trip to Home Depot). That's a little piece of teflon pressing on the heel. Just crank on the bolts on either side of the neck while heating the joint (score the finish around the joint with a razor first). For this LP I just left it in my car parked in the sun on a sunny Washington DC summer day, came out and cranked on the neck bolts about every hour or so....after 8 hrs in the car, the neck had come clean off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.