ScottFinish Posted March 28, 2008 Report Posted March 28, 2008 I have been working on finishing a body only to find that when I sanded off the first layer there was a second layer that appears to have been finish multiple times. I have started to use a chemical but it doesn't seem to be working that well either. I started sanding some more but still not very effective. And keep in mind this is over several hours Quote
ScottFinish Posted March 28, 2008 Author Report Posted March 28, 2008 By the way the pics are in the opposite order Quote
marksound Posted March 28, 2008 Report Posted March 28, 2008 Welcome to the wonderful world of polyester, the nearly bulletproof finish. Opinions vary, but many people find that a heat gun works best to remove it. Quote
ScottFinish Posted March 28, 2008 Author Report Posted March 28, 2008 Used heat gun. Worked like a charm. Heated off the main part of the finish then sanded off the rest so I wouldn't have any burn marks. AWESOME! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.