pariah223 Posted August 15, 2008 Report Share Posted August 15, 2008 When grain filler is applied, once it dries and you sand it, is the surface supposed to be perfectly flat at this point? or does the grain filler just seal up the pores, and then your sealer and finish does the rest?.. i have just applied grain filler to my acoustic and the grain definatly has the filler in it, but if i look really closely it dosnt look perfectly flush.. and im wondering if maybe i applied it wrong? Quote Link to comment Share on other sites More sharing options...
Prostheta Posted August 15, 2008 Report Share Posted August 15, 2008 You may need to make a second application of grain filler on the basis that it may have been dragged out of the pores on the initial application. Quote Link to comment Share on other sites More sharing options...
Mattia Posted August 21, 2008 Report Share Posted August 21, 2008 apply, level, repeat until it's perfectly smooth and level. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.