jazzmasterflex Posted October 8, 2008 Report Posted October 8, 2008 I'm looking at seymor duncan's website, and i only have a red, white, yellow and black wire coming out of the pickups, and this wiring diagram definitely is nowhere near correct i'd say compared with how my guitar is soldered. I'm probably going to flat out undo all the solder points and start all over with new wire, and was just wondering if someone could take a picture of the wiring inside your own HT-10 or draw me out a diagram because the Saga instructions do not give any guidance because they messed up the solder points in the first place. Quote
psw Posted October 9, 2008 Report Posted October 9, 2008 We might need a little more detail... All pickups should have a ground and hot wire each...so you need to identify that... then you need to wire as per a strat diagram of choice making sure you selector switch matches... there are no standards in relation to color codes really.... It might help if you posted the diagram supplied with the kit so as one could interpret it for you maybe... anyway...more info required... pete Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.