Building A Neck For An Existing Body Template Question

[sbskates]

I have always built my own necks then routed the body in accordance to that neck. I am building a guitar for a family member and i used a stew mac neck pocket template ( thinking if neck ever needed replaced iit would be a standard size) and then I grabbed a fender neck ,from afriend to build a template from for the neck. i put the neck in the pocket and to my suprise there is a lot of wiggle room for lacquer paint etc. so i now i need to build a new neck tempate to fit the pocket. any ideas? i figure di could make my new neck wider a bit and rerout the pocket. I also figured i could fill teh pocket in a bit and rerout .