tux91 Posted November 15, 2008 Report Share Posted November 15, 2008 Hi guys , I bought a fretboard from craft supplies and it has wood in the place for the nut. How should i remove it ? Chisel or router? Thanks Quote Link to comment Share on other sites More sharing options...
Prostheta Posted November 15, 2008 Report Share Posted November 15, 2008 You mean that you want to cut a nut slot? Router is fine if you set it up well, otherwise you could use a file. I wouldn't use a chisel myself, but that's not to mean you can't. Quote Link to comment Share on other sites More sharing options...
tux91 Posted November 15, 2008 Author Report Share Posted November 15, 2008 thanks man it had never occured to me to use a file Quote Link to comment Share on other sites More sharing options...
Prostheta Posted November 15, 2008 Report Share Posted November 15, 2008 I would cut it smaller than the target size and then open it out. Files with a blind side are useful in doing this as you can cut it to depth and widen it. A router-cut slot would ensure better depth and width though. I've never done a "Fender style" nut as mine are always butted to the end "Gibson style". Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.