Metalhead28 Posted March 2, 2009 Report Share Posted March 2, 2009 I have a potential customer who wants EMG's with a push/push volume pot for pickup selection. All I can find are 500k and 250k posts of this sort, not the 25k one would normally use for EMG's. Anybody have any experience with this, or a source for the correct pot? Quote Link to comment Share on other sites More sharing options...
Keegan Posted March 10, 2009 Report Share Posted March 10, 2009 (edited) Hmm. You could try wiring a 27.7kohm resistor in parallel with a 250k pot(or 26.3kohm with a 500k pot). You'd be working with some pretty close tolerances though so you'd have to try a few different resistors until you get the taper you want. A 27kohm resistor with 5% tolerance will give you between 25.6kohms and 28.4kohms. Tweaking Pots (Project Guitar page) Edited March 10, 2009 by Keegan Quote Link to comment Share on other sites More sharing options...
Tim37 Posted March 11, 2009 Report Share Posted March 11, 2009 stew mac sells them they are kinda costly though around 12 bucks Quote Link to comment Share on other sites More sharing options...
Keegan Posted March 23, 2009 Report Share Posted March 23, 2009 Stew-mac doesn't sell any push-push pots... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.