ckdoublenecks Posted June 5, 2009 Report Posted June 5, 2009 I need input from someone who really knows guitar wiring wiring. I have a bass over guitar doubleneck unit with dual output jacks, each with completely independant controls. I want to install a switch to: (up position) switch to bass only or (middle position) leave both guitars on or (down position) switch to the guitar only. Help will really be appreciated. Thanks ion advance. Quote
Keegan Posted June 5, 2009 Report Posted June 5, 2009 (edited) This is for a DPDT on/on/on mini-toggle(you can get them at just about any guitar parts place online). The "from" wires are the ones currently going from the lugs on the volume pot of each to the output jack. It'll be easier(and quieter) to have this switch somewhere near the output jacks. If you put it somewhere else, make sure you use shielded wire for the long runs. Edited June 5, 2009 by Keegan Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.