Jump to content

Drum Sander Question


wood is good
 Share

Recommended Posts

Ok guys,

So I am in need of a drum sander. I am not going to buy one. My local woodcraft offers the service of theirs for 45$ an hour. My question is,

How long does it take to run a blank or a bookmatched top through it? If it is almost level already? I have heard it can take a really long time, but I'd like to hear it from you guys who actually have one.

Link to comment
Share on other sites

I have a Jet/Performax 16/32... Takes maybe, 15 - 20 seconds per pass. 4 passes will cover the entire surface of both sides.

Really depends on how many times you need to run it through, but time is definitely not excessive.

I'm assuming we're just talking about surfacing here, not removing a lot of material.

If you need to remove a significant amount, say 1/16", it'll take a few passes.

Edited by Rick500
Link to comment
Share on other sites

Many places I've been that surfaces wood has a minimum charge - they aren't going to power it on, run your top through and charge you for 20 seconds of work. Your place may be different. But it may be worth gathering anything else you think you might need surfaced if you're going to be paying for a half hours worth of time whether or not you use it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...