Jump to content

How Do I Wire This 3-way Strat Style Switch?


Recommended Posts

I'm doing 2 HBs, 1 Vol., 1 Tone, 3 way switch.

It has no numbers on it, so the ones I found weren't very helpful and the diagram that came with the PU's is for a stock Strat switch.

3wayswitch%201.jpg

3wayswitch%202.jpg

I hope someone can help me!

EDIT:

Or does the switch simply get wired like here, just that on my switch all the soldering joints are facing one side, instead of left and right???

WD2HH3L11_00.jpg

Edited by dogdaysunrise
Link to post
Share on other sites

You can mostly picture how it works from looking at it. Most probably, the two centre lugs are the poles and get joined together and go to the volume pot. The three outer lugs on each end are as the three other lugs on each side of the wiring diagram.

Or another way to look at it. Number lugs 1 to 8 left to right

1 and 2 go to bridge pup 4 and 5 go to volume pot, 7 and 8 go to neck pup

With lever pushed to the right, it will be selecting neck only

It doesnt matter which side of the switch you are looking at when you read the above.

John

Edited by JohnH
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...