USMCHueston0311 Posted March 27, 2010 Report Posted March 27, 2010 I got finished scraping the binding and leveling it to the guitar, but there is tool marks, and some knicks in the binding from where the scraper chattererd, how can i smooth these out? Maybe some acetone on a cotton bal? Quote
pariah223 Posted March 27, 2010 Report Posted March 27, 2010 I have only worked with plastic binding once, and did not have this problem.. But could it be as simple as going a little easier with the scraper to smooth it out? I personally wouldnt be comfortable using solvents and stuff on the attached binding.. Quote
Samba Pa Ti Posted March 27, 2010 Report Posted March 27, 2010 if its plastic binding id use wet and dry paper, depends on the plastic though what it will turn out like. Quote
Fliski Guitars Posted April 9, 2010 Report Posted April 9, 2010 Id just carefully go round it with a brand new razor blade... Sanding will make it go fluffy and will probably need scraping again afterwards anyway Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.