alloyguitar Posted November 2, 2011 Report Share Posted November 2, 2011 I have a schematic for a passive mid tone control I was going to put together in a project i'm working on, but it shows a .039 capacitor in the diagram, whereas, with the pickups I want to run (p90's), and pots (500k), i've been advised that a .022 capacitor is the usual choice, so i'm not sure which one to run. This is the diagram i'm referring to: Quote Link to comment Share on other sites More sharing options...
Ripthorn Posted November 2, 2011 Report Share Posted November 2, 2011 Because this is not your typcial tone circuit, it won't necessarily use typical component values (that is the whole point of using it). I would wire it up as is and try that before making any judgments. You can always change it later. Quote Link to comment Share on other sites More sharing options...
alloyguitar Posted November 2, 2011 Author Report Share Posted November 2, 2011 That's what I was assumming, but I figured I'd ask, anyway. Wouldn't want to change something and have it cut the wrong frequencies, or something. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.