Jump to content

Prs Style Build


Recommended Posts

The only thing I can see that needs tweaking is ,in the picture of you using the chisel ,you mite not be holding your tongue just right.hahaha this is a very nice build.

I agree. The tongue should protrude 0.4" from the lips, and at an angle of 15.7 degrees to the left :D

Link to comment
Share on other sites

There's no reason you can't glue shims in to take up the slack. It's easy enough to do. With the neck sitting in line to the centre line, measure the gap each side and cut shims the correct thickness to fit, or you can make the shims a teeny bit thicker than required, and sand them down after gluing them in so you get a nice snug fit.

Link to comment
Share on other sites

Its not supposed to be visable at every angle. Flame moves about on a top as the light hits it at different angles. Clear it & you will be fine.

Go look at it in good natural light & you will see what I mean. Light in a workshop doesnt realy show you what you need.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...