HuntinDoug Posted April 25, 2012 Report Share Posted April 25, 2012 This is the last batch of this run of necks. They are the Beta version of the necks I will be offering on my site eventually. These are straight off the CNC and still have witness marks from the 1/2 ball nose end mill. The stepover was set at .025", so they are easily sanded out. They are a comfortable "C" shape with a small flat edge. The edge is easily removed with a scaper after the fretboard is glued on. All necks have a 13 degree headstock with voloute, and sport no scarf joint. The TR channel is milled out. Headstock thickness is approx .6". Again... these are not "turn key" necks, they will require some minor hand work. Pic of the edge: Some of these have some very minor issues. All are easy fixes. Once again I am offering these here cheap. PayPal only. I prefer to ship to the lower 48 states on this batch. PM me with questions. If you decide you want one, post that it is sold. "First come, first served" PRICING: Any 1 neck = $40.00 + shipping Any 2 necks = $35.00 each + shipping Any 3 necks = $30.00 each + shipping Buy 4 at $30.00 each, and I will throw in the Anigre neck as a freebie _________________________________________________________________________ RN 20 - 3 pice mahogany. Paint or stain grade. _________________________________________________________________________ RN 21 - This is the mate to rn 20. 3 pice mahogany. Paint or stain grade. Small tear out in tr cover channel. Easily fixed with a headplate. _________________________________________________________________________ RN 16 - 3 pice rock maple. Paint or stain grade. Small tear out in tr cover channel. Easily fixed with a headplate. Square heel. _________________________________________________________________________ RN 15 - 3 pice rock maple. This is the mate to rn 16. Paint grade. Small dark spot in the center. No void. Square heel. _________________________________________________________________________ RN 13 - 3 pice figured anigre with babinga pinstripes. Stain grade. Small bandsaw mark on the heel, easily sanded out. Quote Link to comment Share on other sites More sharing options...
USMCHueston0311 Posted April 29, 2012 Report Share Posted April 29, 2012 Doug I think ill take Rn13. Can you make these with a long deep set tenon? Also can you make without the profile carve on the rear of the neck? I need alot of work at that part. Quote Link to comment Share on other sites More sharing options...
ooten2 Posted April 29, 2012 Report Share Posted April 29, 2012 I'm interested in the 2 mahogany necks. Sending PM. Quote Link to comment Share on other sites More sharing options...
USMCHueston0311 Posted April 30, 2012 Report Share Posted April 30, 2012 Pmed Doug. Quote Link to comment Share on other sites More sharing options...
HuntinDoug Posted April 30, 2012 Author Report Share Posted April 30, 2012 OK Guys.... Sorry for the delay. Here is what I've got. RN20 & RN21 are going to Lance. RN13 & an unpictured Mahogany neck are going to Steve. I'm guessing shipping for both of you guys will be about $12.00. I'll PM you the details tomorrow... Thanks, Doug Quote Link to comment Share on other sites More sharing options...
USMCHueston0311 Posted April 30, 2012 Report Share Posted April 30, 2012 Doug what are the taper dimensions of the neck where the board starts/stops? Quote Link to comment Share on other sites More sharing options...
HuntinDoug Posted April 30, 2012 Author Report Share Posted April 30, 2012 Doug what are the taper dimensions of the neck where the board starts/stops? These are set up for 1 3/4" nut width, 25 1/2" scale with a 2 1/16" string width at the bridge. You can use a 22 or 24 fret board. They are designed as a set neck, with 1 1/2" thick heel, but you can modify the heel to be a bolt on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.