Jump to content
Site upgrade hiccups - post editor disabled....working on a fix.... ×
Post editor fixed ×

Recommended Posts

I had a guitar with the frets pretty straight except just two (19 and 21) were sitting up a fraction high. Here's my invention to bring them back into line. A piece of wood with a strip of 600 grit scratchy side out, flanked by two bits of the same wet and dry paper side out, all taped on. Scrape the middle strip along the high fret, it will grind it down until it becomes level with the frets on either side. The paper side out of course doesn't do anything to the flanking frets. Test by rocking a razor blade on the three frets, when it doesn't rock, the job is done. It works a treat.

Picture0007.jpg

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...