audaciousgamer Posted October 24, 2012 Report Share Posted October 24, 2012 Hi, I have a LP Jr DC that I bought as a kit and need help with the wiring. It has one pickup, a volume and tone pot. I'll post a picture and it would be very appreciated if someone can point me to the write direction or show me which wire goes to what. sorry picture rotated itself when I uploaded it I hope you can help Thanks Quote Link to comment Share on other sites More sharing options...
ScottR Posted October 24, 2012 Report Share Posted October 24, 2012 http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1hum_1vol_1tone See if that helps. If not, hunt around on the wiring diagram section of that site, it is one of the best out there. SR Quote Link to comment Share on other sites More sharing options...
audaciousgamer Posted October 24, 2012 Author Report Share Posted October 24, 2012 I've seen that one before but the pickup has like 4 wires coming out of it mine has two one is white and the other has no plastic just the wire. Quote Link to comment Share on other sites More sharing options...
Tim37 Posted October 25, 2012 Report Share Posted October 25, 2012 Then dont look at the red and white wires on the diagram Quote Link to comment Share on other sites More sharing options...
westhemann Posted October 25, 2012 Report Share Posted October 25, 2012 Dude,the bare wire is ground,the other wire is hot.Ignore the neck pickup and the 3 way switch in this diagram..take the wire that goes from the volume to the 3 way switch and solder it to the hot tip on the output jack instead..done.The pickup(which you fail to mention or picture)is most likely a p90.It is the easiest wiring that can be done on a guitar http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=p90 Quote Link to comment Share on other sites More sharing options...
audaciousgamer Posted October 25, 2012 Author Report Share Posted October 25, 2012 Thanks, your last reply has been helpful heaps. I can't do anything until next week I need a soldering iron etc. I will update in a weeks time though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.