Jump to content

Recommended Posts

The Project Guitar.com "Guitar of the Month" contest is a showcase for all the members, so show us your axe in this thread!

This contest is open to any and all members that enter and will be continued each month for a place showing your creation on the homepage!

The winner(s) of course will have his/her guitar featured on the homepage of Project Guitar.com and if you have a website the picture will link directly to it if you so choose (even commercial site's).

If your a forum member you will also be upgraded with a special badge to show you won!

So show us your creation in this thread! You've got till sometime around the 21st or 22nd of February then this thread gets locked and the voting starts!

Any Post that is not an entry will be deleted, feel free to start a new thread to discuss any guitar entered this month

There may be more then one poll to determine winners in different catagorys at the end of this contest!

Please post a maximum of your 4 best pictures per guitar entered

Make sure Your Guitar has a Name or Nick Name as well otherwise one will be given to it :)

Side note, if you are unable to post a picture you can e-mail one to Brian and it will be posted for you, or ask forum members how to post pictures, they are very helpful.

Link to post
Share on other sites

8 String All Aussie Timber Neckthru

Queensland Maple neck

Tasmanian Blackwood wing caps and matching headstock

Tasmanian Oak for rear of wings

Figured Jarrah fingerboard with small gold pearl dot inlays

Soap Box timber binding

Kahler Tremolo

Lundgren M8 Bridge Pickup

Coil split switch

CTS 500k pots

0.022uf Paper Dipped in Oil Capacitor

Switchcraft output jack

Schaller style strap locks

Gotoh tuning Machines

12 degree +/- headstock angle

16" fingerboard radius

27" fingerboard scale

24 frets

6150 Dunlop fretwire

Black side dots





More pics including a few build photos:


Link to post
Share on other sites
  • 3 weeks later...

I just finished this one up a couple of weeks ago so I figured I go ahead and enter this month. This is my Avenger body style, sort of my take on the modern double cut. It has a carved curly maple top, curly maple neck, eastern black walnut back, EIR fret board, and black wood for the binding, bridge base, tailpiece, truss rod cover, pickup rings, and knob tops. The pickups are p-rails, and its got a mini switch to control each on in addition to a master volume, master tone, and three way pickup selector.

more photos on my flickr page http://www.flickr.com/photos/petersinstruments/with/8442391389/#photo_8442391389


avenger 1 by Peters Instruments, on Flickr


avenger 1 by Peters Instruments, on Flickr


avenger 1 by Peters Instruments, on Flickr


avenger 1 by Peters Instruments, on Flickr

Link to post
Share on other sites

12 String Gretsch/Tele

This was an idea dreamed up by a fiend of mine. He loves Orange Gretsch hollow bodies, Fender pro shop Gretsch Tele, and he really wanted a 12 sting ( He loves the Rickenbacker). So we can up with the 12 String Gretsch tele. Then he added the piezo to it. It look me almost a month of testing to make sure the headstock would work. Lots went into it.

Top - Carved Flame Maple

Back - Semihollow Alder/P. Walnut/Alder

Rosewood Fingerboard

Gretsch style thumb MOP inlays

Peruvian Walnut Neck

Flame Maple headstock

Rosewood/brass Bridge

Brass nut

Magnetic wooden back cover

TV Jones Pickups

Ghost System Piezo bridge

Ghost system onboard preamp

Dual Volume - Magnetic/Piezo

Pick up Tone control

12 Gotoh Gold Tuners

Mohawk Orange toner

Mohawk Guitar Lacquer

My forum build journey






Link to post
Share on other sites

RBTele by Boggs of RockBeach Guitars. It's impossible to show how the purple pearloid comes through the black overlay finish in the photos. It's just my take on a classic. It does have a forearm relief cut and also a belly cut.


Link to post
Share on other sites

This one's called the "Busy-B"

Sapele body and neck

Neck-thru construction

Flame Teak top

Fanned frets

Individual ABM bridges

Grover tuners

DiMarzio DLX Plus in bridge position

DiMarzio Virtual P90 in neck position

Toggle switch and single volume knob





Built this guitar a while back but never got around to showing it on PG until It needed a trussrod and fingerboard replacement. The thread :

Link to post
Share on other sites
This topic is now closed to further replies.
  • Create New...