MP63 Posted March 16, 2013 Report Posted March 16, 2013 I have a nice solid-body, guitar made from birch. All I have are water-based stain and Minwax Fast Drying Polyurethane. Any experiences with anything like that? Thanks, Mike Quote
westhemann Posted March 16, 2013 Report Posted March 16, 2013 Test it on scrap.I have had success doing that before on my orange strat I made last year among others...You just have to wait until the stain completely dries. I also put on a very thin rubbed on first coat of poly after the stain dried and let that cure before roughing it up and adding the topcoat.Some of the stain came up and mixed in with the first coat,but after that cured all was stable. Quote
MP63 Posted March 16, 2013 Author Report Posted March 16, 2013 Thanks. Yeah, I was wondering if the poly smudges or pulls some of the stain off. Mike Quote
westhemann Posted March 16, 2013 Report Posted March 16, 2013 Little bit...until the first coat cures Quote
MP63 Posted April 23, 2013 Author Report Posted April 23, 2013 Maybe some blonde shellac first??? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.