Router Table Radius Jig For Fretboards

[MiKro]

I found my old Jig I designed years ago for radiusing Fretboards using a router table.It is based on the Grizzly sanding swing. It will do compound and standard raduis boards.The documentation is not complete as I have moved on to CNC and no longer use this method. You should be able to get an idea of how it is made and it's use.

Mike

http://www.mikrovisions.com/Radius_Jig/

[dpm99]

This looks just like a jig I built to make radius blocks, except with mine, the router goes in the swing and the workpiece goes in the bed.

[MiKro]

This looks just like a jig I built to make radius blocks, except with mine, the router goes in the swing and the workpiece goes in the bed.

Very similar. Like I said I built this a while back in 2003/04. Based it off of the Sanding Fretboard radius jig that Grizzly sells.

[verhoevenc]

Hot! Sold! Building one.

Chris