cherokee6 Posted June 19, 2013 Report Share Posted June 19, 2013 I just wired a new harness from BCS into my Epi Sheraton ii. I also installed a set of stew mac Parsons Street humbuckers. All looked great, so I plugged the harness into a Pignose Hog, to test it. Well, got some hum, distortion, etc. I noticed that when I touch the strings, the noise and distortion stop. There are some distorted sounds, too. Grounding problems? and how do I found the problem grounds. I do have a multi-meter available. I couldn't locate anything addressing this in the tutorials and had problems searching the forum. Any suggestions? Thanks for your help! peace Quote Link to comment Share on other sites More sharing options...
killemall8 Posted June 19, 2013 Report Share Posted June 19, 2013 Check the jack. Usually that problem is from wiring the jack backwards. Quote Link to comment Share on other sites More sharing options...
cherokee6 Posted June 19, 2013 Author Report Share Posted June 19, 2013 I'll check on it. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.