rolloman Posted May 12, 2014 Report Posted May 12, 2014 http://www.spraygunworld.com/products/Sharpe/Sharpe%20Finex%202000.html This unit above I think will be my first HLVP spray gun. Any help on the tip size i should get with it. I will be spraying this here lacquer and vinyl sealer with it from Sherwin Williams. vinyl sealer #T67F3 and Lacquer #T70 C 60 Quote
demonx Posted May 12, 2014 Report Posted May 12, 2014 Welcome to the forum. The paint will have a tech data sheet with recommended tip sizes. Quote
killemall8 Posted May 13, 2014 Report Posted May 13, 2014 Be careful with that stuff... it is extremely hazardous. Quote
killemall8 Posted May 13, 2014 Report Posted May 13, 2014 And i would use a 1.3 or 1.4mm tip. But that part isnt as crucial. Quote
rolloman Posted May 13, 2014 Author Report Posted May 13, 2014 if you spray what are you using. Quote
rolloman Posted May 13, 2014 Author Report Posted May 13, 2014 (edited) thanks. i'll get a good respirator. 1.3, 1.4 is kinda what i've been finding out for that paint. Does the vinyl sealer spray about the same as the lacquer topcoat or is it thicker etc. Edited May 13, 2014 by rolloman Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.