Jump to content

Painting a body with binding on it.


Recommended Posts

I am painting a body in orange lacquer then clear. I don't want to chip, or have the white primer under the paint show due to the scraping of the binding. Should the binding be slight below, even, or slightly above the painted surface before scraping to have less a chance for the primer or paint chipping to occur due to scraping or does it make any difference.

Link to post
Share on other sites

I recently did a gold top Les Paul and what I found is that by scraping the binding level before color coats, I ended up chipping the finish and is the one thing about the build that I kick myself about. If I were to do it again, I would leave the binding a little higher than the body, spray color, then some clear (a coat or two), then scrape back and shoot more clear. Then again, I have never tried it so I have no idea if it would work well or not.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...