spletsto Posted January 27, 2018 Report Posted January 27, 2018 I recently grain filled espave using aqua coat (apply, scrape, sand repeat). I then laid down 4 coats of sanding sealer and during my level sanding I noticed a few spots where I didn't completely fill the grain. Can I re-apply grain filler at this stage even though I have the sealer down or do I need to sand it all back and start over? sorry for the basic question pretty new to this. thanks! Quote
Norris Posted January 29, 2018 Report Posted January 29, 2018 You can try. What is the worst that can happen? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.