Jump to content

Help, Uncontrollable nitro runs


Recommended Posts

I'm finishing my first body using Stew mac Colortone nitrocellolose lacquer.  I put on Stew mac nitro sanding sealer with few problems. A couple runs, but it was obvious I was being heavy handed. Now I'm trying a color coat, tinted with Colortone stain, un-thinned. I started with a very light coat, no problem. The later coats run along the edge, specifically near the horns. I'm spraying with Preval, and hanging to dry after I spray. The last coat seemed to dissolve the earlier coats and ran. After the last attempt, I just wipedit, and all the color came right off. I knew the latter coats could dissolve previous coats somewhat, but enough to cause a run?


Edited by Jude
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...