Jump to content

Recommended Posts

Actually, as it happens, not much of a violin either!

This is a few years ago when I had some Yew offcut left over from a project.  I'd always looked longingly at the super-modern LS Designs violins when they first came out and thought, 'well how difficult could this possibly be?' ;)

I had a look at some of the designs on the internet and it was the super-slim ones with some nice curves that caught my eye the most.  I got hold of commercially available parts like neck, fretboard, chin rest and tailstock and played around with a few paper templates.  This was the sort of think I was going for:

_MG_3239.thumb.JPG.407f3a87accc90834172fb23a40b3ed3.JPG

 

 

The geometry is very different to a guitar so I drew out the concept full-size: 

_MG_3318.thumb.JPG.8e951b2692f6cf385c53f10e4dff5ff4.JPG

 

To get the depth, my plan was to have a ring of mahogany to leave the body as a backless hollow.

It was time to cut some wood.

  • Like 2
Link to post
Share on other sites

interesting.  not a violin guy but def will enjoy seeing this  built.  I imagine building another instrument (other than guitar/bass) probably would involve some valuable and translatable lessons.  do you play?

  • Like 1
Link to post
Share on other sites

Great to see something a little left of field show up around these parts :thumb: You certainly aren't afraid of getting your hands dirty in a variety of different instrument construction projects. What's next - bagpipes pehaps? ;)

  • Haha 1
Link to post
Share on other sites

First job was marking out and cutting out the shape from my Yew plank:

_MG_3279.thumb.JPG.e3d8a5182ef53131d93dc732431a1194.JPG

"But aren't there two?" I hear you ask.  Yes - the original plan was also to make a viola.  Hmmm...best laid plans & all that  ;)

Then glued a Sapele back piece to it:

_MG_3334.thumb.JPG.44a1a8be5d472216e32a1839c18e612d.JPG

And then started the process of removing as much weight as I could.  Violins are light!

_MG_3338.thumb.JPG.72f5f1e159018bb9e596aa3e748f31e0.JPG

_MG_3389.thumb.JPG.1b5fcf91c72cbe4260f6c5a725bb950b.JPG

 

The bought neck blank needed the angle adding to the heel and I also cut a small dovetail:

_MG_3410.thumb.JPG.99df33619a6a1e27aff855ea4db67b60.JPG

 

Likewise, the dovetail was also cut on the body:

_MG_3414.thumb.JPG.cdfa7889af5d5361270db8b248fdb542.JPG

_MG_3416.thumb.JPG.ee59fc62528f968e5e020477a34a7771.JPG

 

Took quite a bit of fettling until it fit properly:

_MG_3418.thumb.JPG.1f26214804ca09febd937f39066facb1.JPG

 

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...