Jump to content

Recommended Posts

A setar is a relatively small instrument with quite fine strings at low tension. I'm going to suggest that bracing isn't actually used.

This document indicates that the most common tuning used is C4-G3-C4-C3.

This page suggests that common strings for the setar are 0.16mm-0.2mm-0.16mm-0.35mm.

Using the values provided you can plug the tunings and string sizes into a string tension calculator to get an idea of the tensions involved. Assuming a scale length similar to a Fender Strat (65cm), with those values each string appears to exert only 4 or 5 pounds of tension, or a couple of kilos each. That's pretty low and unlikely to require bracing the top given that the sound board area of the setar also appears to be quite small.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...