Jump to content

Recommended Posts

We thought along the exact same lines! I've still got the templates. I might make one more if I'm able, and put a guitar stand on one side. They're a great height for playing as well. 

Link to post
Share on other sites

Better photos:

IMG_20200603_095630.jpg

IMG_20200603_095713.jpg

 

Even though the design is relatively simple, some of the details were a trick. Each side is raked 2,5 degrees from the vertical, so the ends of the upper and lower rails need to be cut cleanly and accurately to that so as not to be gappy. The raised cloud lift detail of the upper rail required 3mm of material to be cut from the entire face of the component. It seems a simple operation, but without the right approach can look sloppy. The same applies to the ends of the legs (both with compound 2,5/2,5 degree faces) where the 19mm upper radii blends out from the corners. With it not being 90 degrees, it can't be done as a simple roundover. The diagonal braces supporting the seat inside the frame are also cut with compoung 45/2,5 degree ends to be gap-free.

I enjoy making these sorts of things to practice precision and problem-solving. I think if I do get the chance to make another, some sort of cutout with leather padding and lower bout supports for a guitar would be very cool. Hell, I think the number of people that own guitars these days (especially in Finland) would appreciate this sort of functional furniture.

  • Like 4
Link to post
Share on other sites
1 hour ago, Prostheta said:

......I enjoy making these sorts of things to practice precision and problem-solving....

What a Stirling idea, I tend to do that while I'm making guitars!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...