Jump to content

nut and finish question


drezdin
 Share

Recommended Posts

You can do either...but you don't want to spray finish ON the nut. So either install it and tape it off when spraying -or- tape off the area for the nut, spray, then install it.

I'd suggest installing it first which will reduce the odds of damaging the finish during the nut shaping process. It's easy to tape off as well. Nuts are replaced all the time on previously finished guitars - and you usually have to cut the finish away meaning that originally the nut was installed before the finish.

Hope that helps and good luck!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...