Jump to content

Best paint for flat finish?


Recommended Posts

There are ways you can do this. I don't know how the reults will look though. I think there are flat clears out there. Since they don't use them in the automotive paint world I can't tell you for sure.

However, if you have your paint mixed at an automotive paint store that sells PPG paint, ask for a few ounces of DX265 Flattening Agent. A little added to the paint will go far. For example, 2 ounces in an RTS quart of black makes for some FLAT black paint.

Good luck and be sure to test spray first. Add a bit at a time.

Link to post
Share on other sites
Guest Litchfield Custom Gutars

Choose yeour paint for the finish. I reccomend the duplicolor or house of kolor stuff. Then, top coat with a satin clear. Deft or polyU will work. Flat paint is rough, and will feel like emery cloth....bad feel.

Link to post
Share on other sites

if you have the equipment, i'd go with a ppg/hok system, and add a flattening agent to the topcoat clear. the clear adds a bit of durability, but there are equipment and health issues involved with catalyzed clear.

custom flame painting has a forum that has a lot of painting information and experience roaming around.

hope you find what you're lookin' for. :D

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...