Jump to content

Setting up a new build for locking nut.


Recommended Posts

Can anyone here provide some info or point me to a website or video that shows a good way to install a locking nut? I’m starting a build with a neck that I have an 11 degree angled headstock. At first I thought I would just leave a space on the neck blank between the fretboard and headstock veneer like I would with a normal nut but then I saw the nut would be sitting to low. So I can either make a maple shim to go there, or what might look better would be to leave enough fretboard for the nut to seat on but I’d need to rout a groove so that I’m just leaving a thin bit on the bottom while making sure that the front edge is at the perfect spot. I’m confused as to the best way to do this. Any info would be appreciated. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...