Rones Posted February 29, 2004 Report Share Posted February 29, 2004 Confused! Well, just wondering if there is a uniform thickness required of a peghead so it can accept the tuner machines. I have copied the thickness from my Godin guitar, but am not sure that it will work for the sprezel tuners I am to use on my project. Basically, are all tuner measurements the same? I have not yet recieved the sprezel machines to verify measurements... thanks for the help! Quote Link to comment Share on other sites More sharing options...
westhemann Posted February 29, 2004 Report Share Posted February 29, 2004 about 5/8" Quote Link to comment Share on other sites More sharing options...
Mahelcaya Posted February 29, 2004 Report Share Posted February 29, 2004 I confirm, but for my experience, wait untill you have your tuner in hand, and mesure them properly, i had to sand down my veneer for a wile, cause somehow the tuner I bought (gotoh minis) were slightly shorter than , the ones I mesured on a Takamine guitar I own Quote Link to comment Share on other sites More sharing options...
krazyderek Posted February 29, 2004 Report Share Posted February 29, 2004 5/8" = 15.87mm so for those of us in metric land (the rest of the world ) i just use 16mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.