Page_Master Posted March 5, 2004 Report Posted March 5, 2004 hi everybody can anyone help me with schematics for 2 humbuckers & 1 push/pull pot. well basically, the idea is to have minimum electronic components. so i want the pot to work as a master volume for both pickups, but when the pot is pushed down, the bridge humbucker is on, and when pot is pulled up the neck humbucker is on. so the push/pull on the pot is the pick up selector, yes! only a 2 way switch then. if anyone can help me or even draw the schematics up, it would be geatly appreciated. Quote
daveq Posted March 5, 2004 Report Posted March 5, 2004 It's pretty easy. Just connect both middle lugs of the switch on the push pull to the right lug on the pot. The left-top lug would be the output of the neck pickup and the bottom right would be the output of the bridge pickup. The rest stays the same as a normal 2 HB wiring. I'm sure someone will let me know if I missed something but that's the only mod's you'll have to do from a standard 2 HB wiring. Quote
Page_Master Posted March 6, 2004 Author Report Posted March 6, 2004 thanx daveq, much appreciated. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.