mynamesucks Posted April 4, 2004 Report Share Posted April 4, 2004 Yesterday when radiusing my figer board i noticed a hair line crack from the nut going down to about the second fret. Will this need to be repaired or will it be fine if i leave it alone. Quote Link to comment Share on other sites More sharing options...
daveq Posted April 4, 2004 Report Share Posted April 4, 2004 I had a similar problem a while ago. Mine was an ebony fretboard so I just used a bit of CA glue and it dissapeared completely. I would try to fix it if you can. If it's a maple board, then maybe others will post info on how to fix it without making it noticable - I'm not sure that CA would do as good of a job for maple. (avoid spraying the activator/catalyst for CA glue on maple- I've heard it turns it green) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.