JohnJohn Posted April 20, 2004 Report Share Posted April 20, 2004 What do you find is best for setting binding? I was gonna go the epoxy route,but I have concerns about the wood absorbing the epoxy for a good set. Quote Link to comment Share on other sites More sharing options...
Scott Rosenberger Posted April 20, 2004 Report Share Posted April 20, 2004 plenty of Duco Cement gets the job done very well Quote Link to comment Share on other sites More sharing options...
tdog Posted April 21, 2004 Report Share Posted April 21, 2004 LMI and Stew-Mac both offer binding glue from IPS Corp called Weld-On...It is cement for acrylic sheet.........I prefer the thicker stuff from LMI, #16 in the red tube.....Stew-Mac carries the #1784 in the blue tube....It is thinner and can bleed into the wood much more easily if you apply too much......This makes for a tougher clean-up, not to mention making quite an adventure if you stain or dye after you apply the binding. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.