Strings to the Max Posted April 25, 2004 Report Posted April 25, 2004 Have a Warlock Guitar with Three separate selector Switches on it .Does anybody have or no were to get a wiring dia. for this config. Max! Quote
goth_fiend Posted April 26, 2004 Report Posted April 26, 2004 it would definatly help to know what type of warlock you have, im thinking either a usa model or a custom shop because i have never seen a import with anthing other then vol, tone, vol, switch, and thats 'bout it, let me know the model and i can tell you what you got. Quote
Strings to the Max Posted April 26, 2004 Author Report Posted April 26, 2004 Well it's got a reverse point head stock (Like a Gunslinger) gold hardware ser# 22902 and a org. Floyd Rose and has diamond shaped inlay on the neck! and is green w/black swirls in the paint (cool as hell) !! Hope this helps ( same three switchs I've seen on a Assaassin! ) Max! CLICK BELOW TO SEE GUITAR BC RICH PICS & MORE Quote
lovekraft Posted April 26, 2004 Report Posted April 26, 2004 Looking at that switch layout, it's probably (from top) phase sw, neck coil split, bridge coil split. Are your pots set up VVT? If you can't figure it out, take a picture of the cavity, and somebody around here can figure it out. My US Bich has a different switch lay out, but it's active and has the varitone, so it's not even close. It looks like a Japanese NJ, so I'd assume it's not active lectronics, but there were a few. Nice axe, BTW - let me know when you get tired of it, I'll take it off your hands. Quote
ajb Posted April 27, 2004 Report Posted April 27, 2004 ahh, yeah, could i see a picture of that bc rich, i love them Quote
goth_fiend Posted April 27, 2004 Report Posted April 27, 2004 what they said, and from what i can tell its a weird one, bolt on with a floyd, so it cant be a custom shop (from what i have heard rich refuses to make bolt on customs...go figure) probably a phase switch and coiltaps Quote
lovekraft Posted April 27, 2004 Report Posted April 27, 2004 Yeah, but they've been making guitars for over two decades, and Bernie Sr. made plenty of US bolt necks back in the day. The main reason I tend to think import is the lack of active electronics/varitone, but even that isn't a good indicator. I'd sure like to get a better look at it, especially the inside (hint, hint). Quote
Strings to the Max Posted April 27, 2004 Author Report Posted April 27, 2004 Here you go bro theres a couple of shots of my baby's to .........and Idon't mean kids!!! bc rich cavity pics max!! Quote
lovekraft Posted April 27, 2004 Report Posted April 27, 2004 OK!! The top switch looks to be a coil tap (for whichever pickup is connected to the top volume), the middle looks like a coil tap for the other pickup, and the bottom is probably a phase switch for that same pickup. I've seen that setup in NJs before, but it usually has a pickup selector switch also, so this one kinda threw me. HTH. BTW, nice pics! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.