deathcorip Posted May 15, 2004 Report Share Posted May 15, 2004 basically i need a template for it or some one to give me a measurement of each angle and the length of both the inside and outside of the v roughly. Quote Link to comment Share on other sites More sharing options...
YDoesGodMockMeSo Posted May 15, 2004 Report Share Posted May 15, 2004 www.guitarbuild.com i believe has one. Quote Link to comment Share on other sites More sharing options...
Jehle Posted May 15, 2004 Report Share Posted May 15, 2004 www.guitarbuild.com i believe has one. Gah! You beat me to it. There was a whole discussion about this very thing in this thread... http://projectguitar.ibforums.com/index.ph...wtopic=6217&hl= You can download a CAD program and a drawing there. That's what I did for my V project. Quote Link to comment Share on other sites More sharing options...
MzI Posted May 16, 2004 Report Share Posted May 16, 2004 just to let you know the 67 v template on guitar build is a touch too long in comparison to my v MzI Quote Link to comment Share on other sites More sharing options...
Jehle Posted May 16, 2004 Report Share Posted May 16, 2004 just to let you know the 67 v template on guitar build is a touch too long in comparison to my v MzI The neck that I have is a 24 9/16" scale and the body, at least the size that I drew it out as, was for a 24 3/4" scale. It's just off a little bit. Is this the difference in scale length that you are talking about? Quote Link to comment Share on other sites More sharing options...
MzI Posted May 16, 2004 Report Share Posted May 16, 2004 no not the scale length but the overall length of the wings are a lil off so if you were to put it in a gibson case it would not fit MzI Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.