moojiefulagin Posted May 30, 2004 Report Posted May 30, 2004 Hi! Just superglue-covered my spalted maple and block sanded. the glue filled the impurities well, but of course this resulted in shiny spots where the glue still remains. Is this going to show a lot after final finishing? If so, what should I do!! thanks! Quote
westhemann Posted May 30, 2004 Report Posted May 30, 2004 Hi! Just superglue-covered my spalted maple and block sanded. the glue filled the impurities well, but of course this resulted in shiny spots where the glue still remains. Is this going to show a lot after final finishing? If so, what should I do!! thanks! better p.m. drak...all i know is that if you have a spot of superglue it WILL stand out after finishing i think you need to completely coat it in ca to get around that problem...but you do need an expert opinion on that,and drak is the one to get that from Quote
moojiefulagin Posted May 30, 2004 Author Report Posted May 30, 2004 all right then! youre all over the place wes! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.