podrose Posted June 6, 2004 Report Share Posted June 6, 2004 Hello Project Guitar Forum, I've just registered, although I've been reading here for a while. Some people here are amazingly talented. Anyway, I have a guitar with 1 volume and 1 tone knob. It has H-S-H with (DiMarzio) PAF Pro - HS-3 - PAF Pro and I want to do the wiring as follow: Position: 1:Neck pup 2:Neck inner coil and HS-3 3:HS-3 alone 4.HS-3 and inner bridge coil 5.Bridge pickup alone. Pretty standard I know, but I also want coil splits on postions 1 and 5 from a push pull tone knob. Can anyone give me the wiring diagram for this setup with these pickups? I checked DiMarzios website and they didin't have it :/ Thanks a lot! Joe C Quote Link to comment Share on other sites More sharing options...
lovekraft Posted June 7, 2004 Report Share Posted June 7, 2004 Check the Ibanez site for the RG550 diagram - it should give you the basic setup. Then just add two push/pull pots to split the hums (the Guitar Electronics wiring resources page has a page on hum mods that will show you every way in the world to switch a humbucker if you need help with that). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.