cacibi Posted June 28, 2004 Report Share Posted June 28, 2004 After looking at numerous tele diagrams, which all seem to have different switch wiring, I think I've figured it out. I wired my CRL 3-way tele switch as per the '52 and 60's tele wiring diagram (so that the two end lugs are ganged on either side, then there's a crossover in the middle). When I attach the two pups to the open end lugs on either side, there will be an empty lug remaining on both sides as well. So when the bridge pup is selected, the output of the neck pup is routed to the empty lug and therefore removed from the circuit. At least I think that's what's supposed to happen. Let me know if I've got this straight. Thanks Quote Link to comment Share on other sites More sharing options...
lovekraft Posted June 28, 2004 Report Share Posted June 28, 2004 You got it!! Quote Link to comment Share on other sites More sharing options...
cacibi Posted June 28, 2004 Author Report Share Posted June 28, 2004 Yippee! Always feels better to understand how something works rather than just following the diagram and hoping the person who drew it knew what the hell they were talking about. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.