Devon Headen Posted July 4, 2004 Report Share Posted July 4, 2004 I have a few bocote neck blanks that I don't think I'll ever get around to using. They are perfectly quartersawn and straight grained. Measurements are 13/16" x 3-1/2" x 27". I'd like to get $30 out of each of them. I take Paypal or check/money order. Quote Link to comment Share on other sites More sharing options...
Paradox04 Posted July 9, 2004 Report Share Posted July 9, 2004 are they angled at the headstock Quote Link to comment Share on other sites More sharing options...
Executioner606 Posted July 10, 2004 Report Share Posted July 10, 2004 Got any pics ? They sound interesting Quote Link to comment Share on other sites More sharing options...
truerussian558 Posted July 10, 2004 Report Share Posted July 10, 2004 are they angled at the headstock its a neck blank, meaning its a block of wood to cut a neck out, there is no headstock, its up to you to cut it, just draw and measure your neck and see if 13/16ths inches is theick enough. Quote Link to comment Share on other sites More sharing options...
Devon Headen Posted July 15, 2004 Author Report Share Posted July 15, 2004 I can get pics up...sorry, it took so long, I've been busy. I should have some up by tomorrow Quote Link to comment Share on other sites More sharing options...
Devon Headen Posted July 15, 2004 Author Report Share Posted July 15, 2004 Here are some pics of the wood I'll cut the blanks out of. These pics obviously do not do the wood justice. Partly because my camera is aweful, and partly because my photography skills are just about as bad. PM me if you're interested, and I'll get back to you faster, probably. Quote Link to comment Share on other sites More sharing options...
Devon Headen Posted July 28, 2004 Author Report Share Posted July 28, 2004 I've got one more blank. Bass sized absolutely stunning. I was keeping it because I was gonna use it, but I decided I need to the money. It's the best one out of the lot; tight tight grain and it's pretty dark. I'd like to get $35 out of this because it's bass sized. 3.5"x 34.5" PM me if interested. Everyone that's gotten one of these has been extremely happy with it. Quote Link to comment Share on other sites More sharing options...
Devon Headen Posted August 13, 2004 Author Report Share Posted August 13, 2004 I need money. I'll let it go for 25$. It's the last one I have at least for awhile. Quote Link to comment Share on other sites More sharing options...
camcool Posted August 13, 2004 Report Share Posted August 13, 2004 is it enough for a neck through guitar neck Quote Link to comment Share on other sites More sharing options...
westhemann Posted August 13, 2004 Report Share Posted August 13, 2004 is it enough for a neck through guitar neck no...27" is not long enough for a neck thru Quote Link to comment Share on other sites More sharing options...
skibum5545 Posted August 13, 2004 Report Share Posted August 13, 2004 It would however be long enough for an "ubertenon" set neck (not all the way thru, but like a tenon 3/4 the length of the guitar); on a guitar or a bass (not quite so uber on the bass though): Quote Link to comment Share on other sites More sharing options...
Dr. Jabsco Posted August 14, 2004 Report Share Posted August 14, 2004 Yeah, i got one of thoes blanks, and i was very happy with it! Great wood, and ill probley be using bocote again in future projects. Its very dense, but not to hard to work. And it smells very good when its burned (as i learned in one of my router accidents) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.