Phase switching

[eiseyrokker]

Is it possible to use a 3-way mini-toggle switch (on/on/on or on/off/on) to wire a pickup so that it goes off/phase-switch/on?

thanks. If it's not possible in a 3way, is there any other way to do it that wouldnt involve drilling more than one hole or using a push/pull pot? Thanks.

[jefm]

you can do it with a DPDT on/on switch

12

34

56

you wire 1 up to 6 ....2 up to 5....3 and 4 to the signal you want phased and either 1 and 2 or 5 and 6 for the output....doesn't really matter which

that's you're phasing...if you used an on-on-on it wouldn't work well.....not well at all....you'd just end up shorting it.....if you used an on off on you'd end up leaving it open....both give you no signal....I doubt that's what you are looking for....

for phasing ON-ON is the way to go