I'm building a strat with two SD humbuckers, and I set it up with PRS-style rotary switching. I thought it would be cool to have a rotary switch, turns out it's not so cool. So, I thought up something else, and was wondering if it's possible, and if so how to do it:
A five-position lever switch, the same as a PRS rotary except for the center position:
1 Bridge humbucker
2 Inner pickup coils, parallel
3 Both humbuckers, parallel
4 Outer coils, parallel
5 Neck humbucker
Then, a push-pull volume pot for series/parallel switching, and a push-pull tone pot for phase switching. Those two things should only affect the positions using both pickups, so I count a total of 14 different sounds.
I'm pretty sure I can figure out the push-pull pots, but when it comes to figuring out blade switches I have no idea what's going on. Any help would be GREATLY appreciated.
Thanks,
Drew